Lo cheng wei: <創作>

顯示具有 <創作> 標籤的文章。顯示所有文章

2013年5月23日星期四

<創作> 大學畢業設計高架得來速 Urban Hypermarket

Designer : Lo cheng wei

以創造新形態的都市垂直花園的概念，本設計以建國高架空間為例，使建國花市在大安區內呈現另一種都市意象，不僅橋下空間再度使用，橋上空間的垂直花園也提供行車者消費與當地居民進入參觀，而植物塔中的植物可以經由消費者挑選而運送到消費者手中，提供新型態的都市植物塔概念。

思考高架橋下與高架橋上的空間關係，是否行車在高架橋上無法得知高架橋下的活動行為。並且使高架下空間再度活化為理念，讓橋下空間創造更多發展性。本設計以建國高架橋為例，而目前高架橋下空間是為建國花市，所以嘗試在建國高架上創造另一種新型態的綠色空間與新型態的消費行為，使在建國高架行車的駕駛能夠得知該橋下有花市並且可在橋上做消費的行為。

以創造新形態的都市垂直花園的概念，以建國高架空間為例，使建國花市在大安區內呈現另一種都市意象，不僅橋下空間再度使用，橋上空間的垂直花園也提供行車者消費與當地居民進入參觀，提供新型態的都市植物塔概念。

Today, it shows an obvious drop up and down the bridges. Takeing Jian Guo Highway

as an example, the purchasing behavior under the Highway bridge grows lively and

vividly, yet the space on the Highway bridge could only provide transportation.

People can not enjoy the purchasing even pass through the flower market space area.

This design confers and discusses whether to provide another space section for the

consumers rather than the under-bridge traditional market. Moving up the purchase

behavior onto the Highway bridges so that people passing through in the vehicles

could also enjoy the purchasing behavior. make market gives an extra layout for more

consumers.

Traditional purchase process use to park the car and walk into market ,but the number of parking space and the vehicle are not balance, the difference number is approximate twenty thousand .The average time of find parking space in Taipei city is 17 minute. that is wasting timewhen consumer looking for parking space during market process.

panel 1 it analysis relationship between highway and flower market which is under expressway.

panel 2 it analysis the car parking space problem in Taipei downtown. We propose a solution that maybe drivers can buy flowers without stopping car. Drivers no longer worry about hardly find a parking space in downtown.

panel 3 the architecture contains greenhouse, drive-through and existing flower market which is under express way.

panel 4 greenhouse zone

panel 5 how to buy flower by using driver-through .

panel 6 physical model

panel 7 urban hypermarket

2013年5月21日星期二

<創作> 論文主題 : 從感測到快速客製化 From Measuring to Rapid Customization: A Prototyping Chair

研究所論文分享今天整理資料翻出來的:

英文版 :
https://dl.dropboxusercontent.com/u/29860061/A%20Streamlined%20Design-Measuring-Production%20Process%20for%20Rapid%20Customization.pdf

中文版:
https://dl.dropboxusercontent.com/u/29860061/羅崢瑋-9947509.pdf

主題 : 從感測到快速客製化

在中文版論文中

第二章部分是目前市面上有使用互動感測技術並實作的案例。

第三章部分的壓克力椅子是設計來接受使用者坐在椅面上面的壓力與可調整造型的模型(資訊模型)，並同時與電腦中資料同步。

第四章部分是把資訊模型上的資料經過設計過後的程式包裝成各式不同風格的圖樣紋路(紋路當然是依據資訊模型而來，也是使用者自己設計的樣式)。

第五章之2節是選取其中一個紋路做為整個設計流程的模型呈現，從設計師設計資訊模型 -> 讓使用者自行決定樣式 -> 經過程式計算施工構件 -> 消費者自行組裝 or工廠代工，完成整體設計流程，即參予者即是設計師。

中文摘要

本論文以椅子設計流程作為實現日常物件客製化的例子，提出從感測人體尺寸到消費者參與椅子設計的流程，到最終製作出一張實體的客製化椅子。感測人體尺寸的部份會製作出一張原型感測椅；目的在於把使用者的身體資訊擷取下來當作參數化模型上的參數因子。配合使用者自行調整參數模型和原型感測椅上的造型，使用者可以充分的參與在客製化流程中的設計、反覆的修改模型和預視即將完成的作品。

Abstract

Since the emerging of computer-aided design, designers can trace out more smooth and graceful outline than ever. To achieving precise fabrication, they can also adjust the outline in the 3D software repeatedly. After confirming the works, a prototype model is manufactured to do the ergonomics adjusting by designers. Then, the modification will get the ball rolling in 3D software back and forth. Compromising designers’ concept and modified prototype, the computational data could flow of considerable standardized productions subsequently.

A sensor embedded chair was taken as a prototype, and those sensors will record the data and transmit to the computer when the subjects change their sitting posture, for instances, back side angles, chair height, and the outline shapes with preferences. In the mean time, the virtual model can be changed after receiving those data. Later on, the preview of appearance with transforming will follow by designers choose one of diverse fabricate model, like tessellating, folding, forming or contouring in 3D software. Inputting the manufacturing information to the synchronized fabricating model, designers could restrict the materials, moldboard size and procedures. As a result, outputting these data to the manufacturer, they could construct a modified chair in customization.

精選圖片 :

消費者在不同流程時的角色位子

參數化建模系統(Schaub, 2011)

同步傳輸照片

Tessellating type

2013年4月16日星期二

<創作>Remove duplicated surface in Grasshopper

Remove duplicated surface in GH;
移除共同曲面;

因為每次要經過RP都不能存在共面的情況，不然支撐材與實體計算
GCODE會產生錯誤判斷，所以寫個移除共面，讓模型全是實體。
當然你也可以用boolean的功能移除共面，但是如果模型過於複雜，
Rhino中的boolean也計算不出來會錯誤。